Home > Products > RF Connectors > 7/16 Din Connector
The 7/16 DIN Series is designed for use in transmission of medium to high power in transmitting stations and low loss transmission of received signals. These connectors perform exceptionally well in multi-channel cellular systems where power levels approximate 100 watts per channel.
Antennas Base Stations Cable Assembly
Jumper Cable Broadcast Components (Control)
Lightning Protection Satcom  
Interface Mating Dimensions:

Interface Dimension in Millimeters
Male Female
mm mm
  Min. Max.   Min. Max.
A 7.00 nom A 7.00 nom
B 15.85 15.85 B 15.85 16.25
C 18.03 18.21 C Resilient dim.
D 20.60 21.40 D 22.10 22.90
E 4.96 5.04 E    
F M29x1.5 F M29x1.5
G 1.47 1.77 G 0.50 0.70
H   4.5 H 1.77 2.07
I 7.00 9.00 I 8.10  
K 7.00 8.00 K 10.00  
L 32.00 nom L  
Technical Characteristics
Impedance 50 ohm
Frequency Range 0 - 7.5 GHz
Working Voltage 2700 VRMS max.
Dielectric Withstanding Voltage 4000 VRMS
VSWR Straight 1.3 max.
Right Angle 1.5 max.
Contact Resistance Center Contact 4 Milliohm Max.
Outer Contact 1.5 Milliohm Max.
Insulator Resistance 5000 Mega ohms min.
Part Name Material Finish
Body, Metal Parts Brass Nickel, Silver or
Brass Tin-Zinc-Copper Alloy
Center Contacts Plug: Brass Gold
  Jack: Beryllium Copper, Phosphor Bronze Gold
Insulator PTFE  
Crimp Ferrule Annealed Copper Nickel, Silver or
Brass Tin-Zinc-Copper Alloy
Clamp Gaskets Silicone Rubber  
Mechanical & Environmental
Durability (Mating) 500 cycles min. (For Be/Cu Jack Contact only)
Temperature Range -65°C ~ 85 °C