Din Connectors, 7/16 Din Connector Application.

RF Connectors

Crimping Tool Stripping Tool
Antenna
Antenna Cable

Home > Products > RF Connectors > 7/16 Din Connector

The 7/16 DIN Series is designed for use in transmission of medium to high power in transmitting stations and low loss transmission of received signals. These connectors perform exceptionally well in multi-channel cellular systems where power levels approximate 100 watts per channel.

Applications

Antennas	Base Stations	Cable Assembly
Jumper Cable	Broadcast	Components (Control)
Lightning Protection	Satcom

Interface Mating Dimensions:

Interface Dimension in Millimeters
Male			Female
mm			mm
	Min.	Max.		Min.	Max.
A	7.00 nom		A	7.00 nom
B	15.85	15.85	B	15.85	16.25
C	18.03	18.21	C	Resilient dim.
D	20.60	21.40	D	22.10	22.90
E	4.96	5.04	E
F	M29x1.5		F	M29x1.5
G	1.47	1.77	G	0.50	0.70
H		4.5	H	1.77	2.07
I	7.00	9.00	I	8.10
K	7.00	8.00	K	10.00
L	32.00 nom		L

Technical Characteristics

Electrical

Impedance		50 ohm
Frequency Range		0 - 7.5 GHz
Working Voltage		2700 VRMS max.
Dielectric Withstanding Voltage		4000 VRMS
VSWR	Straight	1.3 max.
	Right Angle	1.5 max.
Contact Resistance	Center Contact	4 Milliohm Max.
	Outer Contact	1.5 Milliohm Max.
Insulator Resistance		5000 Mega ohms min.

Material

Part Name	Material	Finish
Body, Metal Parts	Brass	Nickel, Silver or Brass Tin-Zinc-Copper Alloy
Center Contacts	Plug: Brass	Gold
	Jack: Beryllium Copper, Phosphor Bronze	Gold
Insulator	PTFE
Crimp Ferrule	Annealed Copper	Nickel, Silver or Brass Tin-Zinc-Copper Alloy
Clamp Gaskets	Silicone Rubber

Mechanical & Environmental

Durability (Mating)	500 cycles min. (For Be/Cu Jack Contact only)
Temperature Range	-65°C ~ 85 °C

2F, No.27, Jhong-Rong St., Sin-Jhuang City, Taipei County 242, Taiwan
Tel :886-2-89941601 Fax :886-2-89941602
E-mail :sales@rfconnector.com.tw